Pawprint PP50 is a 25.6V 50Ah LiFePO4 wheelchair battery with 1,280Wh nominal energy, 10.0 kg weight and 50A continuous discharge. Request equipment fitment and charger matching.
Model
Pawprint PP50
Energy
25.6V 50Ah 1280Wh
Weight
10.0 kg
Pawprint PP50 is a 25.6V 50Ah LiFePO4 battery for compatible wheelchairs and mobility equipment. It provides 1,280Wh of nominal energy in a 260 × 167 × 210 mm case, with a specified weight of 10.0 kg.
| Model | Pawprint PP50 |
|---|---|
| Battery chemistry | Lithium iron phosphate (LiFePO4) |
| Nominal voltage | 25.6 V |
| Rated capacity | 50 Ah |
| Nominal energy | 1,280 Wh |
| Dimensions (L × W × H) | 260 × 167 × 210 mm |
| Weight | 10.0 kg |
| Continuous discharge current | 50 A |
| Peak discharge current | 100 A for 35 seconds |
| Discharge cut-off voltage | 20 V; any cell: 2.5 V |
| Internal impedance | <30 mΩ at 50% SOC |
| Self-discharge rate | ≤3% per month |
| Standard charge current | 25 A |
|---|---|
| Maximum charge current | 50 A at 25°C (77°F) |
| Standard charge voltage | 29.2 V |
| Charge method | CC/CV |
| Charging temperature | 0°C to 55°C |
| Discharging temperature | -20°C to 60°C |
Confirm the charger output, connector polarity and controller compatibility for the specific wheelchair. Ask Wiren for the approved storage conditions and maintenance instructions for the supplied battery version.
Provide the wheelchair or mobility-scooter model, battery compartment dimensions, connector type, controller current, existing charger specification and order quantity. These details help verify fitment and the required battery configuration.
Check PP50 Fitment and Charger → | Compare Wheelchair Batteries
Recommended Products
