| Inverter mode |
| Output voltage waveform |
Pure sine wave |
| Rated output power (VA) |
Split phase: 7200W |
Split phase: 10000 |
Split phase: 12000 |
| Single phase:6000W |
Single phase: 7200 (limited by the wiring terminals) |
Single phase: 7200 (limited by the wiring terminals) |
| Rated output power (W) |
Split phase: 7200W |
Split phase: 10000 |
Split phase: 12000 |
| Split phase: 7200W |
Single phase: 7200 (limited by the wiring terminals) |
Single phase: 7200 (limited by the wiring terminals) |
| Power factor |
1 |
| Rated output voltage (Vac) |
120Vac (L1/N, L2/N)/240Vac(L1/L2) |
| Output voltage error |
±5% |
| Output frequency range (Hz) |
50Hz±0.3Hz/60Hz±0.3Hz |
| Maximum Efficiency |
>92% |
>92% |
>91% |
| Overload protection |
(105% < load <110%) ±5% : report error and turn off the output after 5 minutes;(110% < load < 125%) ±5% : report error and turn off the output after 10 seconds;Load >125% ±5% : report error and turn off the output after 5 seconds; |
| Peak power |
Split phase: 10800VA |
Split phase: 15000VA |
Split phase: 18000VA |
| Single phase: 10800VA |
Single phase: 10800VA |
Single phase: 18000VA |
| Loaded motor capability |
4HP |
5HP |
6HP |
| Output short circuit protection |
Continuous short circuit 200ms protect |
Can protect, after continuous short circuit for 1 second |
| Bypass circuit breaker specification |
2pole, 50A/50A(L1/L2) |
2pole, 63A/63A(L1/L2) |
2pole, 200A/200A(L1/L2) |
| Rated battery input voltage |
51.2V (Minimum starting voltage 44V) |
| Battery voltage range |
40.0Vdc~58.6Vdc±0.6Vdc (Undervoltage alarm /shutdown voltage /overvoltage alarm /overvoltage recovery...settable on LCD screen) |
40.0Vdc~58.6Vdc±0.6Vdc (Under voltage alarm /shutdown voltage / over voltage alarm /over voltage recovery... settable on LCD screen) |
40.0Vdc~58.6Vdc±0.6Vdc (Undervoltage alarm /shutdown voltage / overvoltage alarm /overvoltage recovery...settable on LCD screen) |
| Power saving mode self-consump tion |
Load per phase is null or less than 25W enter power-saving mode |